RapiDesign Templates

Contains pentagons hexagons heptagons and octagons. Size: 5" x 6-7/8" x .040".

Scale: ¼" = 1'. Features the most standard-sized counters and tables for use in laying out store display cases, counters, etc. Thickness: .030".

Contains valves flanges elbows reducers caps and pumps. Size: 5-3/16" x 8½" x .030" .

Unless otherwise indicated, all templates contain upper and lower case letters and numerals. 1/8", 3/16", ¼"

For architects, builders and contractors. Contains the symbols most commonly used in the profession. Includes roof pitch gauge and 16" spacing in 4" modules. Scale: ¼" = 1'. Same symbols as No. R-22 template. Size: 5½" X 3 ¼"....

Contains 14 five-pointed stars from 1cm to 10cm. Size: 21.5cm x 23.5cm x .8mm.

Contains various sizes of gate and inverter symbols with selected combination of electronic symbols. Size: 5¾" x 3¾" x .030".

Contains slots for letter sizes 1/8" 5/32" 3/16" and ¼". Size: 3-3/8" x 6-7/8" x .060".

Contains vertical letters and numbers in 1/8"-5/16" and 3/16". Size: 2" x 10 ¼" x .020".

Contains sofas curved and angular pieces wall units and desks. Scale: ¼" = 1'. Size: 11" x 8½" x .030".

Contains 62 circles from 3/64" to 7½". Size: 7½" x 10-3/8" x .030".

Contains symbols for pipe end bell flange and fittings in seven sizes. Size: 5" x 8" x .030".

Contains 45 circles from 1/16" to 2 ¼". Size: 7 ¼" x 8 ¼" x .030".

1/8" 5/32" 13/16" and ¼" size slots for freehand drawing or drawing guide lines. Size: 10" x 4 ¼" x .030".

For architects, builders and contractors. Contains the symbols most commonly used in the profession. Includes roof pitch gauge and 16" spacing in 4" modules. Scale: ¼" = 1'. Same symbols as No. R-22 template. Size: 12" X 12". Thickness: .030". ...

Contains various symbols for landscape design. Scale: ¼" = 1'. Size: 5" x 8 1/8" x .030".

RAPIDESIGN drawing templates have been designed to conform to the exacting demands of the professional architect, draftsperson and engineers.

Contains arrows north indicators road signs and two sizes of traffic markers. Size: 4" x 6" x .030".

Contains large dining room table sizes. Scale: ¼" = 1'. Size: 11" x 8½" x .030".

Contains 30 triangles. Size range from 3/32" to 1-3/8". Size: 4" x 7" x .030".

Contains standard welding symbols. Size: 3½" x 6" x .030".

Scale: 1" = 1'. Size: 8" X 5". Thickness: .030".

A tool for drawing 26 circles with an additional 12 radii for center locating. Three scales: 1" = 20� 50� 100�. Size: 7½" x 9½" x .060".

1/8" = 1'. To plan furniture and appliance arrangement before or after house is completed or when furniture re-arrangement is contemplated. Size: 6" X 3½". Thickness: .030".

Contains 12 isometric ellipses with axes from 1½" to 2" in increments of 1/8" and from 2" to 7" increments of ¼".Size: 6-1/16" x 9-7/8" x .030".

Contains many useful symbols including circles squares hexagons triangles and rectangles. Size: 6½" x 4¾" x .030".

For planning banquet seminar or conference room layouts. Scale: 1/8" = 1'. Size: 6 1/8" x 4 1/8" x .030".

Contains basic lighting fixtures used in the construction industry. Scales: 1/8" and ¼" = 1'. Size: 5 ¼" x 7 ¼" x .030".