Electrical and Electronic Templates

Contains standard symbols used for schematic diagrams. Size: 5 ¼" x 8 ¼" x .030".

Contains a selection of standard cutouts which in combination create most electric/electronic symbols. Size: 4½" x 7¾" x .020".

Contains electronic tubes capacitors circuit breakers resistors relays switches logic symbols etc. Designed for .200" grid. Size: 5" x 7" x .030".

Contains standard symbols used in machinery and automation circuits. Size: 3¾" x 8" x .030".

Contains various sizes of gate and inverter symbols with selected combination of electronic symbols. Size: 5¾" x 3¾" x .030".

Contains a comprehensive set of three templates conforming to ANSI Y32.2. Size: 7¾" x 5" x .030"; 8" x 4-3/8" x .030"; 8" x 3¾" x .030".

Size: 5" x 8" x .030".

Contains coils connectors contacts instruments and transformers. Size: 3 ¼" x 6" x .030".

Contains small sizes of common shapes used in design. Size: 4-7/8" x 8" x .020".

Contains standard symbols used in machinery and automation circuits. Size: 3 ¼" x 8" x .030".

Contains standard equipment symbols. Size: 5½" x 7½" x .030".

The most comprehensive set of electrical/electronic templates, taken from ANSI Y32.2 symbols, grouped into sections for easy use and are in correct relative size so any size grid can be obtained through photographic reduction.

Contains electrical and other symbols used in the utility and power and light industries. Size: 8" x 8" x 11½" x .040".

Contains transformers resistors capacitors etc. Designed for .250" grid. Size: 5" x 8 ¼" x .060".

The most comprehensive set of electrical/electronic templates, taken from ANSI Y32.2 symbols, grouped into sections for easy use and are in correct relative size so any size grid can be obtained through photographic reduction.

Contains electrical and electronic symbols grouped for greatest ease in drawing. Scale: 2:1. Size: 6 1/8" x 7" x .030".

Contains pentagons hexagons heptagons and octagons. Size: 5" x 6-7/8" x .040".

Combination of most used logic and electronic symbols. Size: 3 ¼" x 4½" x .030".

Conforms to ANSI y32.2 symbology. Based on line spacing of .15" grid. Designed for microfilming. Thickness: .030".

All diagrammatic elements of electronic and cathode ray tubes are provided for, plus tube bases of 4, 7, and 8 prong type, in addition to all symbols in the field of electronics. Cut-outs beveled for inking. Thickness: .060".